⎝⎛真人游戏开户注册⎞⎠

24-hour service hotline

400-998-9229 0371-67993087

Please enter the correct phone number, customer service will contact you later!

Submit successfully, customer service will contact you later!

Heat pump drying equipment

Product introduction

The heat pump dryer uses air energy heat pump unit as the heat source, and the return air is dehumidified. The hot air that enters the drying room each time is dry air to avoid the influence of circulating moisture on the material. The hot air adopts the circulation method. According to the technological requirements of different products, the air circulation can choose through-flow, advection, counter-current and other methods. The automatic dehumidification system is designed, the heat can be recycled, and the temperature is controlled automatically. It has the advantages of fast drying speed, large output and low operating cost.

Applicable materials

The high temperature heat pump dryer can handle flowers, agricultural and sideline products, Chinese medicinal materials, granular materials, etc.

National 24-hour sales hotline:

400-998-9229 0371-67993087

Technology and specifications

The main components of the heat pump dryer include the equipment skeleton, cavity, kiln car and tray, hot air system, heat pump system, dehumidification system, intelligent control and alarm system, etc .; the drying room is controlled by units, and each unit can set the temperature independently In the section, the air inlet method of each part can be selected according to the process requirements (such as flow through, advection, counter current, and downstream), and the selection is based on the drying process, material characteristics, energy saving effects, and drying efficiency. Because the equipment is relatively wide, and the air inlet of the fan uses one side of the air, the material on one side will have a certain temperature difference with the material on the other side. Non-uniformity.

Heat pump dryer is a new type of high-efficiency energy-saving dryer. Its working principle is based on the principle of inverse Carnot cycle, using a small amount of electrical energy, using a compressor, and passing the working fluid through an expansion valve into a gaseous state. It absorbs a large amount of thermal energy in the air. The gaseous working medium is compressed by the compressor into a high-temperature and high-pressure gas, and then enters the condenser to release heat and heat the drying medium. In this way, the heating medium can be heated to 40 ℃ ~ 110 ℃. Compared to the electric dryer, it saves two-thirds of the electricity.

Product advantages

  • Easy installation

    Easy installation and demolition, small footprint, can be installed indoors or outdoors.

  • Efficient and environmentally friendly

    Less power consumption and more heat, the power consumption is only 1 / 3-1 / 4 of electric heater; compared with coal and oil, it can save 75% of the cost.

  • Environmental protection without pollution

    Without any burning matter and emissions, it is a sustainable and environmentally friendly product.

  • Safe and reliable operation

    It is a safe and reliable semi-closed system without the dangers of flammable, explosive, poisoning and short circuit that may exist in traditional dryers.

  • Long life and low maintenance costs

    The process technology is mature, the performance is stable, reliable, and the service life is long; the operation is safe and reliable, and the automatic intelligent control.

  • High degree of automation and intelligence

    Self-controlled constant temperature device, continuous drying operation for 24 hours.

Technical Parameters

Heat pump dryer model

Take BDHW-FT-40 as an example

Select equipment

Boda heat pump drying equipment

Dimensions

25m × 2.75m × 3.6m (h)

Lumen size

25m × 2.2m × 2m (h)

Cart size and quantity

Feeder size: 1m * 0.5m * 1.7m (h) 24 floors in total; each device has three channels and is designed to place 23 * 3 = 69 cars;

Kiln car discharge area

24 floors × 0.5㎡

Hot air temperature control range

Normal temperature ~ 75 ℃

Drying room design

Each unit has an independent hot air cycle every two meters, and the wind circulates laterally, the temperature is reduced, and the drying is more uniform.

transfer method

Manual or automatic feeding

Circulation fan

0.55kw * 12

Heat pump parameters

Heat pump fan: DLF3.0A low-noise centrifugal fan, the parameters are as follows: air volume 4000 ~ 3000m³ / h, full pressure 310Pa, motor power 0.55kw, speed 900r / min

Equipment input power

≤100kw

heating method

Hot air circulation heating, through-flow heating, heat pump dehumidification

Control System

PLC control, touch screen, automatic temperature control, heat pump dehumidification, video monitoring, transmission control, air volume control, running status display, fault display, etc.

transfer method

Manual or automatic feeding

Product Appointment

客户姓名: * Customer name:
联系电话: * Contact number:
Area:
  • Beijing
  • Tianjin
  • Hebei Province
  • Shanxi Province
  • Inner Mongolia Autonomous Region
  • Liaoning Province
  • Jilin Province
  • Heilongjiang Province
  • Shanghai
  • Jiangsu Province
  • Zhejiang Province
  • Anhui Province
  • Fujian Province
  • Jiangxi Province
  • Shandong Province
  • Henan Province
  • Hubei Province
  • Hunan Province
  • Guangdong Province
  • Guangxi Zhuang Autonomous Region
  • Hainan
  • Chongqing
  • Sichuan Province
  • Guizhou Province
  • Yunnan Province
  • Tibet Autonomous Region
  • Shaanxi Province
  • Gansu province
  • Qinghai Province
  • Ningxia Hui Autonomous Region
  • Xinjiang Uygur Autonomous Region
    product name:
    Heat pump drying equipment
    • Heat pump drying equipment
    • Heat pump intelligent drying room
    • Solar heat pump flue-cured tobacco room
    • Heat pump drying equipment
    Statement of needs:
    • Phone: 400-998-9229
    • Phone: 0371-60999358
    • Email: boda@tingpad.com
    • WeChat: bodawb
    ----- Boda's development history, customers have witnessed growth -----

    Witness development with visible facts

    Successful Case

    〖Many well-known brands ✔ Choose Boda〗
    • Beijing Tongrentang

      Beijing Tongrentang

    • Miss you jujube industry

      Miss you jujube industry

    • China Shipbuilding Industry Corporation

      China Shipbuilding Industry Corporation

    • China Ordnance Group · Central South Diamond

      China Ordnance Group · Central South Diamond

    • China Minmetals

      China Minmetals

    • Sinopec

      Sinopec

    • AVIC Lithium Battery

      AVIC Lithium Battery

    • China FAW

      China FAW

    • Jiangxi Tungsten Group

      Jiangxi Tungsten Group

    • Zhongjing Wanxi Pharmaceutical

      Zhongjing Wanxi Pharmaceutical

    • Ni's International Rose Industry

      Ni's International Rose Industry

    • CSPC

      CSPC

    • Zijin Mining

      Zijin Mining

    • Tasly Group

      Tasly Group

    • China Aluminum

      China Aluminum

    • Sinosteel Group

      Sinosteel Group

    • Chinese Academy of Agricultural Sciences

      Chinese Academy of Agricultural Sciences

    • Zhengzhou Banu Hairy Belly

      Zhengzhou Banu Hairy Belly

    • Yuguo mushroom industry

      Yuguo mushroom industry

    • Youyan Institute

      Youyan Institute

    • Yaodu Group

      Yaodu Group

    • Shougang Group

      Shougang Group

    • BYD

      BYD

    • Minsheng Pharmaceutical Group

      Minsheng Pharmaceutical Group

    Public Security No. 41019702002388
    欢乐拼三张 七乐彩 星力捕鱼 欢乐拼三张